Vana Toyota elule aitamine
Postitatud: P Veebr 21, 2016 12:17 pm
Otsin vana kolli elule aitajat (keretööde teostajat, pahtel+värv)
Auto hetkel rootsis aga kuabale saades liigub siia juunis
Omanik on rootslane seega oleks hea kui tegija või tegija abistaja
oskab kas rootsi või ingl keelt. Tegemist on mul venna sõbra autoga (tegelevad rootsis sama asjaga, millega meie siin 
Käe võivad tõsta nii erategijad kui ka ettevõtted!
The worst is the back fenders and the edge between the rear fenders under the rear doors. Everything must be fixed with 1,25mm sheet and no thinner.
Lower edge on both doors need to be made , and a spot in front of the driver's door . The hardtop and rear doors are from the other two cars and only need some minor fix,
no major rust stuff, but to be painted white inside and outside . The windows must be removed before painting. I have new door moldings to be glued there after .
The whole car must be painted in white Toyota Code 031st
There is a small hole in the floor on the passenger side type 5x5cm .
The whole under side of the car should then be coated with tectyl over the wheel arches , frame shoulders etc ..
The parts that are blue to be sprayed black (grille , airbox , bumpers ) . All lights, grille , spare wheel holder , etc. will be removed .
https://drive.google.com/folderview?id= ... sp=sharing
Panin pildid lingi alla ehk nüüd on näha
Auto hetkel rootsis aga kuabale saades liigub siia juunis
Omanik on rootslane seega oleks hea kui tegija või tegija abistaja
oskab kas rootsi või ingl keelt. Tegemist on mul venna sõbra autoga (tegelevad rootsis sama asjaga, millega meie siin Käe võivad tõsta nii erategijad kui ka ettevõtted!
The worst is the back fenders and the edge between the rear fenders under the rear doors. Everything must be fixed with 1,25mm sheet and no thinner.
Lower edge on both doors need to be made , and a spot in front of the driver's door . The hardtop and rear doors are from the other two cars and only need some minor fix,
no major rust stuff, but to be painted white inside and outside . The windows must be removed before painting. I have new door moldings to be glued there after .
The whole car must be painted in white Toyota Code 031st
There is a small hole in the floor on the passenger side type 5x5cm .
The whole under side of the car should then be coated with tectyl over the wheel arches , frame shoulders etc ..
The parts that are blue to be sprayed black (grille , airbox , bumpers ) . All lights, grille , spare wheel holder , etc. will be removed .
https://drive.google.com/folderview?id= ... sp=sharing
Panin pildid lingi alla ehk nüüd on näha
